Regulation and Antitrust

We have seen that monopolies have the ability to raise prices and restrict quantities, putting them at the other end of the spectrum from the competitive market price-taker ideal. Thus, monopolies are price makers. Also, we have just seen that firms use their market power to price discriminate, attempting to achieve as much producer surplus as they can even if it comes by way of reducing consumer surplus. In an attempt to mitigate the maximum market power of monopolies, government has used two approaches: regulation and antitrust.

Regulating the Natural Monopolist

natural monopoly An industry exhibiting large economies of scale such that the minimum efficient scale of operations is roughly equal to market demand.

As we saw when we discussed barriers to entry, there are some instances when natural monopolies occur. A natural monopoly exists when economies of scale are so large that the minimum efficient scale of operation is roughly equal to market demand. In this case, efficient production can only be accomplished if the industry lies in the hands of one firm—a monopolist. Public utilities and water departments are examples.

How can policymakers prevent natural monopolists from abusing their positions of market dominance? There are various approaches to dealing with natural monopolies: (1) They can be publicly owned, (2) they can be privately owned but subjected to price and quantity constraints, or (3) their right to operate could be auctioned to the firm agreeing to the most competitive price and quantity conditions.

232

A market representing a natural monopoly is shown in Figure 10. Notice that the average cost and marginal cost curves decline continually because of large economies of scale.

Regulating a Natural Monopoly A natural monopoly exists when economies of scale are so large that the minimum efficient scale of operation is roughly equal to market demand. In this case, efficient production can only be accomplished if the industry lies in the hands of one firm—a monopolist. Yet, if the monopolist is a purely private firm, it will produce only output QM, selling it for price PM (point a). This is the principal rationale for regulating natural monopolies to produce output QR for a price of PR (point b).

If the monopolist were a purely private firm, it would produce only output QM and sell this for price PM (point a). Accordingly, the monopolist would earn economic or monopoly profits, and consumers would be harmed, receiving a lower output at a higher price. This is the major argument for regulation.

marginal cost pricing rule Regulators would prefer to have natural monopolists price where P = MC, but this would result in losses (long term) because ATC > MC. Thus, regulators often must use an average cost pricing rule.

Marginal Cost Pricing Rule Ideally, regulators would like to invoke the P = MC rule of competitive markets and force the firm to sell QC units for a price of PC. This is the marginal cost pricing rule and would be the optimal resource allocation solution. Yet, because price PC is below the average total cost of production for output QC, this would force the firm to sustain losses of cd per unit, ultimately driving it out of business. The public sector could subsidize the firm by an amount equal to area PCCCdc; this subsidy allows the firm to supply the socially optimal output at the socially optimal price, while earning a normal return. This approach has not been used often in the United States. Amtrak, with its history of heavy subsidies for maintaining rail service, may be the one major exception.

average cost pricing rule Requires a regulated monopolist to produce and sell output where price equals average total cost. This permits the regulated monopolist to earn a normal return on investment over the long term and therefore remain in business.

Average Cost Pricing Rule The more common approach to regulation in the United States has been to insist on an average cost pricing rule. Such a rule requires that the monopolist produce and sell output where price equals average total costs. This is illustrated by point b in Figure 10, where the demand curve intersects the ATC curve and the firm produces output QR and sells it for price PR. The result is that the firm earns a normal return. Consumers do lose something, in that they must pay a higher price for less output than they would under ideal competitive conditions. Still, the normal profits keep the firm in business, and the losses to consumers are significantly less than if the firm were left unregulated.

Regulation in Practice America has a long history of public utility regulation. For most of this history, regulation has been accepted as the lesser of two evils. Monopolists have long been viewed with distrust, but regulators have just as often been portrayed as incompetent and ineffectual, if not lapdogs of the industries they regulate.1 Although this characterization is probably unfair, a number of economists, including Nobel Prize–laureate George Stigler, viewed regulation with skepticism and proposed changes on improving the efficiency of regulation.

233

Regulating a large enterprise always presents immense difficulties and tradeoffs. For one thing, finding a point like b in Figure 10 is difficult in practice, given that estimating demand and cost curves is an inexact science, at best, and markets are always changing. In practice, regulators must often turn to rate of return or price cap regulation.

rate of return regulation Permits product pricing that allows the firm to earn a normal return on capital invested in the firm.

Rate of return regulation allows a firm to price its product in such a way that it can earn a normal return on capital invested. This leads to added regulations about the acceptable items that can be included in costs and capital expenditures. Can the country club memberships of top executives be counted as capital investments? Predictably, firms always want to include more expenses as legitimate business expenses, and regulators want to include fewer. Regulatory commissions and regulated firms often have large staffs to deal with such issues, and protracted court battles are not uncommon.

price caps Maximum price at which a regulated firm can sell its product. They are often flexible enough to allow for changing cost conditions.

Alternatively, regulators can impose price caps on regulated firms, which place maximum limits on the prices firms can charge for products. These caps can be adjusted in response to changing cost conditions, including changes in labor costs, productivity, technology, and raw material prices. When a large part of a regulated firm’s output is not self-produced but purchased on the open market, price caps can have disastrous results. This was seen in the California energy market, when wholesale prices for energy went through the roof, but price caps prevented private utilities from raising the retail price of electricity. Several firms had to file for bankruptcy.

NOBEL PRIZE GEORGE STIGLER (1911–1991)

Few modern economists have broken ground in so many different areas as George Stigler, described by some admirers as the “ultimate empirical economist.” His 1982 Nobel Prize cited seminal work in industrial structure, the functioning of markets, and the causes and effects of public regulation.

Born in 1911 in the Seattle suburb of Renton, Washington, Stigler attended graduate school at the University of Chicago with fellow students and eventual Nobel Prize winners Milton Friedman and Paul Samuelson. Stigler later became a professor at the University of Chicago where he stayed until his death in 1991.

Exploring the relationship between size and efficiency led him to the “Darwinian” conclusion that by observing competition in an industry, he could determine the most efficient sizes for firms, a method he called “the survivor technique.” In the 1960s, Stigler studied the impacts of government regulation on the economy with skepticism, arguing that government interventions were often designed to optimize market conditions for producers instead of protecting the public interest. This work opened up a new field known as “regulation economics” and kindled greater interest in the relationship between law and economics.

Stigler considered his work on information theory his greatest contribution to economics. Conventional wisdom suggested that prices for perfectly competitive industries should be uniform, but in the real world, prices often varied. His research suggested that the variation could be explained by the costs of gathering and diffusing information about goods and prices. The Internet was supposed to bring a convergence of prices for nearly every product because the Internet’s low information costs and competition would force firms to quickly meet the lowest seller’s price. The fact that there are still widely varying prices for many products suggests that Stigler’s insights are still important.

Today, the pace of technological change is so rapid that regulation has lost some of its earlier luster and is not used as often. Rather than regulate the few natural monopolies that do arise, government has sought to prevent monopolies and monopolistic practices from arising at all—what is called antitrust policy.

Antitrust Policy

antitrust law Laws designed to maintain competition and prevent monopolies from developing.

Rather than regulatory tinkering, governments have tried a broader approach to deal with monopolies and their market power. The goal of antitrust law is to preserve competition and prevent monopolies with their maximum market power from arising in the first place.

The origin of antitrust policy came in the late 1800s, when many large trusts were established, which brought many firms under one organizational structure allowing them to act as monopolists. Massive wealth accumulations by such “robber barons” as John D. Rockefeller (Standard Oil) and Jay Gould (railroads and stock manipulation) sparked resentment and fear against trusts and the growing inequity of income and wealth. Trusts had become so powerful—and so hated—that Congress passed the first antitrust act, the Sherman Act, in 1890. Antitrust laws and policies thus had their origins in trust-busting activity. Many of these laws still are in existence today with their primary role of preventing the inefficiencies associated with monopoly behavior.

234

The Major Antitrust Laws

Several major statutes form the core of the country’s antitrust laws. The most important provisions of these laws (as amended) are described in Table 1.

The intensity of antitrust enforcement has varied over the past century, from an early focus on monopolies, then on mergers, and more recently on price fixing—conspiracies by firms to agree on industry prices to suppress or eliminate competition. Although price-fixing cases have been prominent, it is merger policy developed in the 1950s that has really stood the test of time. Economists and judges generally agree that the reason for antitrust enforcement is to prevent the inefficiencies associated with significant market power. Premerger notification for approval or challenge by the Department of Justice is designed to prevent mergers that have a reasonable likelihood of creating market power. This is easier said than done.

Defining the Relevant Market and Market Power

The first problem involves defining market power. What is the relevant product market? Some markets can be severely limited geographically, such as concrete, with its extremely high transport costs, and dry cleaning, limited by the unwillingness of consumers to travel far for this service. Other markets are national in scope, like airlines, breakfast cereals, and electronics. Still others extend beyond the borders of a country, with the forces of global competition increasingly reducing domestic market power.

The second problem is determining the proper measuring device of market power. As an industry moves from competition to monopoly, pricing power rises from zero to total. One of the challenges economists have faced is developing one measure that accurately reflects market power or concentration for all these market structures.

Industries that become more concentrated increase the losses to society. Therefore, any measure of concentration should accurately reflect the ability of firms to increase prices above that point which would prevail under competitive conditions.

235

concentration ratio The share of industry shipments or sales accounted for by the top four or eight firms.

Concentration Ratios The most widely used measure of industry concentration is the concentration ratio. The n-firm concentration ratio is the share of industry sales accounted for by the industry’s n largest firms. Typically, four- and eight-firm concentration ratios (CR-4 and CR-8) are reported.

Although useful in giving a quick snapshot of an industry, concentration ratios express only one piece of the market power distribution picture: the market share enjoyed by the industry’s four or eight largest firms. Table 2 shows the market shares of the four largest firms in two different industries. Industry 1 contains a dominant firm with 65% of the market, followed by a bunch of smaller firms. Industry 2 consists of four fairly equal-sized firms, followed by a bunch of smaller firms. In both industries, however, the four-firm concentration ratio is 85; that is, the top four firms control 85% of industry sales. But do the two industries exhibit the same level of monopoly power? Hardly! The second industry, whose top four firms are roughly equal in size, would be expected to be more competitive than the first, in which 65% of the market is controlled by one firm.

Without more information about each industry, concentration ratios are not overly informative, except to point out extreme contrasts. If one industry’s four-firm concentration ratio is 85, for instance, and another’s is 15, the first industry has considerably more monopoly power than the second.

Economists and antitrust enforcers, however, need finer distinctions than concentration ratios permit. For this reason, the profession has developed the Herfindahl-Hirschman index.

Herfindahl-Hirschman index (HHI) A way of measuring industry concentration, equal to the sum of the squares of market shares for all firms in the industry.

Herfindahl-Hirschman Index The Herfindahl-Hirschman index (HHI) is the principal measure of concentration used by the Department of Justice to evaluate mergers and judge monopoly power. The HHI is defined by the equation:

HHI = (S1)2 + (S2)2 + (S3)2 +…+ (Sn)2,

where S1, S2,…Sn are the percentage market shares of each firm in the industry. Thus, the HHI is the sum of the squares of each market share. In a five-firm industry, for instance, in which each firm enjoys a 20% market share, the HHI is

The HHI ranges from roughly zero (a huge number of small firms) to 10,000 (a one-firm monopoly: 1002 = 10,000). By squaring market shares, the HHI gives greater weight to those firms with large market shares. Thus, a five-firm industry with market shares equal to 65, 15, 10, 5, and 5 would have an HHI equal to

236

The HHI is consistent with our intuitive notion of market power. It seems clear that an industry with several competitors of roughly equal size will be more competitive than an industry in which one firm controls a substantial share of the market.

Applying the HHI The Hart-Scott-Rodino Act (1976) requires prenotification of large proposed mergers to the FTC and the antitrust division of the Department of Justice. Prenotification gives federal agencies a chance to review proposed mergers for anticompetitive impacts. This approach prevents some mergers from taking place that would ultimately have to be challenged by Sherman Act litigation, a far more costly alternative for the government and for the firms involved.

The Department of Justice and the FTC in 1992 issued merger guidelines based on the HHI. These guidelines classify industries as follows:

Mergers where the resulting HHI is below 1,000 will often be approved. Mergers with postmerger HHIs between 1,000 and 1,800 will be closely evaluated; they are often challenged if the proposed merger raises the HHI by 100 points or more. When the HHI for the industry exceeds 1,800, a postmerger rise in the HHI of 50 points is enough to spark a challenge.

These guidelines have worked well, giving businesses a good idea of when the government will challenge mergers. Most mergers are rapidly approved; the remainder often require only minor adjustments or more information to satisfy government agencies. In the end, only a few proposed mergers are seriously challenged.

Contestable Markets

contestable markets Markets that look monopolistic but where entry costs are so low that the sheer threat of entry keeps prices low.

Sometimes what looks like a monopolist does not act like a monopolist. Markets that are contestable fit this description. Contestable markets are those markets with entry costs so low that the sheer threat of entry keeps prices in contestable markets low. Potential competition constrains firm behavior. For example, Microsoft might charge more for its latest version of Windows if Linux were not nipping at its heels.

Another common example of a contestable market is the airline industry. Small regional carriers often fly unique routes from small airports to major tourist destinations such as Las Vegas and several spots in Florida. Although many of these routes are unique (in that only one airline serves the route), airlines tend to keep fares reasonable rather than exploit their market power for that route. Airlines realize that if fares are priced at the monopoly level, another airline might enter and compete. The ability to change airline service routes quickly forces airlines to keep prices at a competitive level, even if they are the only airline providing service between two cities.

The Future of Antitrust Policy

Today’s economy differs from the old economy in many ways. The old economy was grounded in manufacturing and distributing physical goods such as steel, automobiles, appliances, and shoes. These old economy industries enjoyed economies of scale in production, often requiring huge capital requirements and modest rates of innovation.

Much of what new economy firms produce is intellectual property. In large measure, it is computer code of one form or another. Most of the costs to produce the programs are fixed, already sunk once the product is completed. To produce and distribute the product costs only a fraction of the product’s value; if the Internet is used, distribution costs can approach zero. This means markups and profits are high, which creates a strong incentive to clone successful products. Monopolies, therefore, tend to be transitory in the new economy. The travails of Lotus 123, WordPerfect, MySpace, and Netscape all testify to the vulnerability of temporary monopolists in the media industry. All were industry leaders at one point, only to be rapidly displaced.

237

Antitrust laws and policy need to be adjusted to new market realities. In our global information and service economy, many of the old rules are irrelevant. One federal judge and economist, Richard Posner, argues that we should repeal all the old antitrust laws and replace them with a simple statute that prohibits “unreasonably anticompetitive practices.”2

When a firm’s market share approaches monopoly levels, turning to antitrust laws is the obvious response.

This and the last chapter looked at the polar opposites of market structures, competition and monopoly, with characteristics of each shown in Table 3. The next chapter looks at the market structures in the middle and also looks at a more modern approach to analyzing firm behavior, game theory.

REGULATION AND ANTITRUST

  • Regulating monopolies may involve a marginal cost pricing rule (have the monopolist set price equal to marginal cost) or an average cost pricing rule (have the monopolist set price equal to average total cost).
  • In practice, regulation often involves setting an acceptable rate of return on capital or setting price caps on charges.
  • The Sherman Act (1890) prohibited monopolization and attempts to monopolize.
  • The Clayton Act (1914) prohibited price discrimination that lessened competition.
  • The Federal Trade Commission Act (1914) prohibited unfair or deceptive business practices and established the Federal Trade Commission.
  • Concentration ratios measure market concentration by looking at the share of industry sales accounted for by the top n firms.
  • The Herfindahl-Hirschman index (HHI) measures concentration by computing the sum of the squares of market shares for all firms in the industry.
  • The Department of Justice uses the HHI to set premerger guidelines.
  • Contestable markets are markets with entry costs so low that the potential threat of entry keeps prices low.

QUESTION: In September 2011, AT&T attempted to buy one of its major competitors, T-Mobile, in a $39 billion acquisition that the U.S. Department of Justice eventually blocked. Explain why the Department of Justice would block such a merger from taking place. Assume that the wireless communications industry contains four equal-sized firms (AT&T, Verizon, Sprint, and T-Mobile); how would the HHI be used to justify the government’s decision?



The government aims to prevent powerful monopolies, which can restrict competition and lead to fewer choices and higher prices, from forming. The Sherman Antitrust Act of 1890 and the Clayton Act of 1914 provide the legal basis for such action. The government uses concentration ratios or the HHI as a gauge to determine whether a pending merger would harm competition. If each of four firms controls 25% of the market, the HHI is 2,500, already a very concentrated industry. By allowing AT&T and T-Mobile to merge, the HHI would increase from 2,500 to 3,750, making the industry even more concentrated.

238