Concept Practice
Wavelength and Cone Responses

Chapter 16. Wavelength and Cone Responses

cones
photoreceptor cells in the eye specialized for detailed color vision in bright light
hue
the apparent color of the light; related to wavelength
perception
organizing and interpreting information from the senses to understand its meaning
retina
light-sensitive inner surface of eye, containing rods and cones
statistic
a calculated number that summarizes important information about a distribution of scores
wavelength
the width of a light wave, measured as the distance between peaks; related to the hue (perceived color) of a light
Wavelength and Cone Responses
true
true
true
Learning Objectives:

Distinguish among the three types of cones in the human retina.

Understand the relationship between the wavelength of light and the amount of neural activity generated in each type of cone.

concept_review

Review

Select the NEXT button to continue with the Review.

Diagram of eye. The retina is labeled on the back curve of the eye. At the center of the retina at the back of the eye, directly behind the lens, is a line extending to the right side of the screen to show a zoomed in version of the cells in this part of the eye. The cone cells are cone shape and labeled for their respective colors: R for red, G for green, and B for blue. The rod cell is cyclindrical shaped and has no color.

1. Color vision is possible because the retina of each eye contains about 6 million cones divided into three types: short-wavelength "blueish" cones (B), medium-wavelength "greenish" cones (G), and long-wavelength "reddish" cones (R).

concept_review

Review

Select the NEXT button to continue with the Review.

The graph has three bell-shaped curves. The horizontal X axis shows Wavelength in anometers ranging from 350 to 650 in increments of 50.  The vertical Y axis shows Relative Response with no scale listed. A blue curve representing short-wavelength (blue) cones starts low on the relative response axis at around 375 nanometers in wavelength, increases to 430 nanometers at a high relative response rate, and then decreases back down. A green curve representing medium-wavelength green cones starts low on the relative response axis at around 450 nanometers in wavelength, increases to 530 nanometers at a high relative response rate, and then decreases back down. A red curve representing long-wavelength red cones starts low on the relative response axis at around 475 nanometers in wavelength, increases to 570 nanometers at a high relative response rate, and then decreases back down. The red curve overlaps the green curve on the right side.

2. This graph shows the relative response of each type of cone to lights of different wavelengths in nanometers (billionths of a meter). Each type of cone reacts most strongly to light of a particular wavelength (the peak of each curve), but also responds to light above and below the optimal wavelength.

concept_review

Review

Select the NEXT button to continue with the Review.

here is a picture of the sun. Curved lines repreenting light waves extend away from the sun and towards a green apple. Green lightwaves at 530 nanometers travel from the green apple to a person's eye. Within the retina, a red cone is activated at 55%, a green cone is activated at 90%, and a blue cone is activated at 0%. A thought bubble above the person's head states: i'm seeing green!

3. The brain evaluates the relative level of response from all three types of cones as it constructs a perception of the hue (apparent color) of objects. For example, the light reflected from this apple generates a stronger response from the medium-wavelength cones, so the brain perceives the apple as having a greenish hue.

spectrum_graph_1
true

Practice: Wavelength and Cone Responses

Drag the slider across the spectrum and observe how the response of each type of cone changes.

A slider appears at the top of the page representing Frequency in nanonmeters or billionths of a meter. The bar ranges from 400 to 700, in increments of 100.  The color of the slider starts at purple at 400 nanometers and transitions to blue, green, yellow, orange, and then red at 700 nanometers. When the slider is at 400 nanometers, there is moderate activation of blue cones and very little to no activation of green or red cones. The experienced hue is purple. As the slider moves closer to 450, there is high activation of blue cones and still very little to no activation of green and red cones. The experienced hue is blue. When the slider is at 500 nanometers, there is lower than moderate activation of  blue cones, low activation of green cones, and little to no activation of red cones. The experienced hue is teal, a combination of blue and green. As the slider moves to 550, there is little to no activation of blue cones, high activation of green cones, and moderate activation of red cones. The experienced hue is bright green with a yellow tint. When the slider is at 600 nanometers, there is little to no activation of blue cones, moderate activation of green cones, and high activation of red cones. The experienced hue is orange. As the slider moves to 650, there is little to no activation of blue or green cones, but high activation of red cones. The experienced hue is a combination of red and orange. As the slider moves to 700, the blue and green cones stay inactive but the red cones decrease between low and moderate activation. The experienced hue is bright red.
Frequency
in nanometers (billionths of a meter)
Experienced hue
Below the slider is a bar graph with three bars. A blue bar represents short-wavelength or blue cones. A green bar represents medium-wavelength or green cones. A red bar represents long-wavelength or red cones. As the slider is moved from a lower frequency to a higher frequency the bars in the graph get taller to represent greater activation of the cones or shorter to represent less activation of the cones
B G R
Responsiveness of cones
B = short-wavelength cones
G = medium-wavelength cones
R = long-wavelength cones

Note that our color experience (hue) depends on the combined responses of the three types of cones.

spectrum_test1

Quiz 1

First, drag the slider to review the relationship between wavelength and the response of each type of cone. Then, answer the question below the graph. When you have chosen an answer, select the CHECK ANSWER button.

A slider appears at the top of the page representing Frequency in nanonmeters or billionths of a meter. The bar ranges from 400 to 700, in increments of 100. The color of the slider starts at purple at 400 nanometers and transitions to blue, green, yellow, orange, and then red at 700 nanometers. 
When the slider is at 400 nanometers, there is moderate activation of blue cones and very little to no activation of green or red cones. The experienced hue is purple. As the slider moves closer to 450, there is high activation of blue cones and still very little to no activation of green and red cones. The experienced hue is blue. When the slider is at 500 nanometers, there is lower than moderate activation of blue cones, low activation of green cones, and little to no activation of red cones. The experienced hue is teal, a combination of blue and green. As the slider moves to 550, there is little to no activation of blue cones, high activation of green cones, and moderate activation of red cones. The experienced hue is bright green with a yellow tint. When the slider is at 600 nanometers, there is little to no activation of blue cones, moderate activation of green cones, and high activation of red cones. The experienced hue is orange. As the slider moves to 650, there is little to no activation of blue or green cones, but high activation of red cones. The experienced hue is a combination of red and orange. As the slider moves to 700, the blue and green cones stay inactive but the red cones decrease between low and moderate activation. The experienced hue is bright red.
Frequency
in nanometers (billionths of a meter)
Experienced hue
B G R
Responsiveness of cones
Select the NEXT button and move to Quiz 2.
You did not answer the question correctly. Try again.
Which wavelengths of light produce the strongest sensation of blue?
short wavelengths (400-500 nanometers)
medium wavelengths (500-600 nanometers)
long wavelengths (600-700 nanometers)
spectrum_test2

Quiz 2

Drag the slider until these three conditions are met. With all the conditions met, select the CHECK ANSWER button.

A slider appears at the top of the page representing Frequency in nanonmeters or billionths of a meter. The bar ranges from 400 to 700, in increments of 100. When the slider is at 400 nanometers, there is moderate activation of blue cones and very little to no activation of green or red cones. The experienced hue is purple. As the slider moves closer to 450, there is high activation of blue cones and still very little to no activation of green and red cones. The experienced hue is blue. When the slider is at 500 nanometers, there is lower than moderate activation of blue cones, low activation of green cones, and little to no activation of red cones. The experienced hue is teal, a combination of blue and green. As the slider moves to 550, there is little to no activation of blue cones, high activation of green cones, and moderate activation of red cones.  The experienced hue is bright green with a yellow tint. When the slider is at 600 nanometers, there is little to no activation of blue cones, moderate activation of green cones, and high activation of red cones. The experienced hue is orange. As the slider moves to 650, there is little to no activation of blue or green cones, but high activation of red cones. The experienced hue is a combination of red and orange. As the slider moves to 700, the blue and green cones stay inactive but the red cones decrease between low and moderate activation.  The experienced hue is bright red. Students should move the slider to the area where the frequency corresponds to the experienced hue of yellow. This is recognized by when the red cones are highly activiated, green cones are slightly less activated, and the blue cones are inactive
Frequency
in nanometers (billionths of a meter)
Experienced hue
Below the slider is a bar graph with three bars: a blue bar labeled B, a blue bar labeled G, and a red bar labeled R. As the slider is moved from a lower frequency to a higher frequency the bars in the graph get taller to represent greater activation of the cones or shorter to represent less activation of the cones
B G R
Responsiveness of cones
Select the NEXT button and move to the Conclusion.
You did not drag the slider to the appropriate location. Try again.

When three things occur together—the short-wavelength cones are quiet, the long-wavelength cones are very active, and the medium-wavelength cones are slightly less active—we see "yellow."

end_slide
Congratulations!

You have completed the activity Wavelength and Cone Responses.